Rock Shox PIKE Suspension Fork Manual Del Usuario página 10

M a i n t e n a n c e
We recommend any service be performed by a qualified bicycle mechanic. To obtain
service information or instructions, visit our website at www.sram.com or contact your local
rockShox dealer or distributor.
Take your bicycle to a qualified dealer for inspection and repair if there is any question of
component integrity due to a crash or other direct impact.
Before disassembly or service of any air system remove the air pressure from all air
chambers. For complete service instructions visit www.sram.com/service.
To maintain the high performance, safety, and long life of your front suspension, it is required
that you periodically check the fastener torque values for compliance as well as perform
routine maintenance on your fork. if you ride in extreme conditions, torque compliance
checks and maintenance should be performed more frequently.
FRont SuSPEnSion FAStEnER
Top Caps
Bottom Bolt
Disc Brake Mounting Bolts
Clean dirt and debris from upper tubes
Check air pressure (air forks only)
inspect upper tubes for scratches
Lubricate dust seals and upper tubes
Check front suspension fasteners for proper torque
remove lowers, clean/inspect bushings and change
oil bath
Clean and lubricate air spring assembly
Change oil in damping system (including hydraulic
lockout)
10
MAintEnAncE
WA R n i n g
13.6 n•m (120 in-lb) non-drive side
28.2 n•m (250 in-lb) drive side
toRQuE VAluE
7.3 n•m (65 in-lb)
10.2 n•m (90 in-lb)
intERVAl (hours)
every ride
every ride
every ride
every ride
25
50
100
100