Sticking The Infrared Deflectors (Eb-1460Ui/Eb-1450Ui Only) - Epson BRIGHTLINK PRO 1460U Guia De Instalacion

c
When installing the Touch Unit (EB-1460Ui/EB-1450Ui only), if there are any obstacles at the bottom
of the whiteboard such as a frame or trays, stick the infrared deflectors along the bottom edge of
the whiteboard before adjusting the projector.

"Sticking the infrared deflectors (EB-1460Ui/EB-1450Ui only)"

s
a
Press the [Power] button on the remote control or the control panel to turn on the projector
Using the Remote Control
Caution
While projecting, do not put your face or hands near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
b
Open the air filter cover, and then adjust the focus using the focus lever
Fine-tune the focus later.
After you finish making adjustments, close the air filter cover.
c
•
You can change the display language from Language on the Extended menu.
Projector's User's Guide - Projector menu
s
•
When you turn on the projector for the first time, the message "Do you want to set the
time?" is displayed. If you set it later, select No.
Using the Control Panel
47
Installation Guide
p.52