Digital Controller - DESJOYAUX PISCINES JD PAC 8 Manual De Instrucciones

Digital controller

Water set point temperature setting:
1. Press and hold button for one second to display the set point value,
then press .
After a moment, the previously value begins to flash.
2. Increase or decrease the set point value with the and/or buttons
until the desired value is displayed.
3. Press again to confirm the new value.
The recommended heating temperature is 28° C; higher temperatures are
not recommended.
These units are designed to operate in ambient air temperatures between 8° C
and 35° C.
The traces of humidity under the unit are caused by condensation naturally
produced by the heat pump and occurs during normal operation.
Please note: these values are indicative and may vary by several degrees
from the actual pool temperature (depending on the distance between the
heat pump and the pool, whether the heat pump is in the sun, etc.).
36