Additional Modules - Eurocave Compact Instrucciones De Montage

F (
eet mv
PARt
x2
P
edeStal
FAStENiNGS
ax8
tooL REQUiRED
(supplied)
PARtS
A
B
Cx2
4
GB
9)
Abutting columns of Modulotheque share a pair of feet (see Pedestal Module figs. 5 and 6) Thus to enable you
to assemble a run of abutting columns each Pedestal module (MV2) is supplied with 1 pair of feet. You need 1
extra pair of feet to complete the run or for an isolated single column. See installation and assembly (Chapter
MV2 or MV17).
m (
odule mv
1
+ 2 foot supports for the 1st module (MV9)
2
4
5
6
2/ 2 40)
mv l
A
C
a
B
1st MoDULE
1
Position the foot supports (C) (4 for the
first pedestal module and just 2 for every other
abutting pedestal) in the grooves provided, lining
them up with the holes in the wooden pedestal.
a
Screw together diagonally until tight, using 2
screws (a).
2
Place the module on the floor and set the level
and height if it is to be a single or initial module.
3
Locate the rack (B) in its housing.
3

ADDitioNAL MoDULES

4
Line up the module with the previous module
and locate the previous module's foot supports in
the grooves of the new basic module.
5
Line up the holes and insert the 2 screws (a) in
the remaining holes in each foot support.
6
Check the height and level of the assembly.
7
Locate the rack (B) in its housing.
7
B
B