Marmitek CONNECT 421 Modo De Empleo página 5

2. Connect the HDMI cables of your sources to the 'HDMI inputs' of the Connect
421™.
3. Connect the Digital Audio out to a Digital Audio receiver (for instance A/V Receiver)
with a Coaxial or Toslink digital audio cable.
4. Connect an Ethernet cable (if desired) to the front side if you want to use the HEC
function.
5. Connect the power supply to the back side and plug into the power outlet.
6. Pull the plastic strip from the battery compartment of the remote control to activate
the battery and use the remote control.
7. Remove the protective foil (against scratching) from the top of the remote control.
Tips for installation:
• Use only High Speed HDMI® certified cables for the best image and sound quality.
• Use only High Speed HDMI® with Ethernet support certified cables if your
equipment uses the ARC or HEC function.
USING
Automatically switch between HDMI sources
When one of the HDMI sources is used, the Connect 421™ will automatically switch
to the appropriate input channel. If numerous HDMI sources are already in use, the
Connect 421™ will automatically switch to the most recently active HDMI source.
Note: Automatic switching must be supported by the HDMI source.
Manual switching between HDMI sources
The 'Select' button on the front of the Connect 421™ can be used to manually switch
between the various HDMI sources. Or use the remote control to manually select an
HDMI source.
The LED lights on the front of the panel indicate which source is active.
Consumer Electronics Control (CEC)
CEC is a functionality of HDMI to simplify controlling multiple devices. The Connect
421™ actively supports the following functions of CEC (providing that the connected
equipment is suitable).
• One Touch Play:
Switch one of the HDMI sources (for instance Blu-Ray player) ON, the Connect
421™ and your HDTV will then automatically switch ON too and the correct HDMI
inputs will be selected.
• System Standby:
When you switch the HDTV to standby, the Connect 421™ and all HDMI sources
will automatically switch to standby too.
CONNECT 421™ 5