Dymo LabelWriter SE450 Guía Rápida De Inicio página 6

Become familiar with the printer's major components. See Figure 2.
Top cover
Label spool
Label release
Label feed path
and tear bar
LabelWriter Printer Features
Your LabelWriter printer is a direct thermal printer and does not use ink or toner. Instead, the printer
uses heat from a thermal print head to print on specially treated labels. Labels are the only supplies
you will ever need to buy.
The form-feed button on the front of the printer advances a single label.
The status light visually shows the current state of the printer:
• Solid blue - USB cable is connected and printer is ready to print.
• Solid green - Serial cable is connected and printer is ready to print.
• Dimmed blue or green - printer is in power saving mode.
• Flashing red - Labels are not loaded properly or the label roll is empty.
• Flashing green - Printer is in configuration mode. Refer to the Technical Reference Guide.
2
Label roll
connector
connector
channel
Form-feed button
and status light
Figure 2
Serial
USB
USB 10101 24VDC
Cable
DC power
connector
Serial number