Cleaning; Reassembling Your Cushion After Cleaning - Ki Mobility Axiom SP Visco Manual De Instrucciones

C. Cleaning (Continued)
3. Axiom SP Fluid - Cleaning the Fluid Pad
a. Remove the cover from the foam base.
b. Remove fluid pad from the inner cover and wipe with hot water and soap.
c. Rinse with a clean, damp cloth. Dry with a clean cloth.
NOTICE: Axiom SP Fluid - Never submerge the fluid pad in any liquid.
NOTICE: Axiom SP Fluid - Avoid harsh cleaning or rough handling as this may lead to a
degradation of the fluid insert.
D. Reassembling Your Cushion After Cleaning
Axiom SP Visco
1. After Proper Cleaning and Maintenance
a. Insert the foam base into the inner cover with the label down and the zipper to the
rear of the cushion.
b. Insert base plus inner cover into the outer cover. Ensure that white inner cover label
is down and zipper is to the rear.
c. Close the zipper on your cushion ensuring that the zipper-pull ends up closed with
the pull tucked into the zipper pocket cover.
Viscoelastic Foam Insert
(Pre-installed)
Care & Use Instruc ons
60C
Inside
Cover
Foam Cushion
Zipper fully
closed and
zipper-pull
tucked into
cover.
Machine Wash, Hot
Do Not Bleach
Tumble Dry, Normal, No Heat
Do Not Iron
Do Not Dry Clean
Foam Cushion in
Inside Cover
Assembled
Cushion
8
Outer Cover