Ki Mobility Axiom SP Visco Manual De Instrucciones página 10

D. Reassembling Your Cushion After Cleaning (Continued)
Axiom SP Fluid
1. After Proper Cleaning and Maintenance
a. Insert foam base into the inner cover.
b. Install the fluid insert by mating the hook and loop closure sections from the fluid
insert onto the hook and loop closure sections on the inner cover.
c. Install base/inner cover/fluid insert assembly into the outer cover.
d. Close the zipper on your cushion ensuring that the zipper-pull ends up closed with
the pull tucked into the zipper pocket cover.
Foam Cushion
Hydrolite
Fluid
Bladder
Foam Cushion in Inside Cover
WARNING: Place the Axiom SP fluid pad on the inner cover ensuring that all hook and
loop closure locations are aligned. A misalignment or creation of an edge could cause
an unwanted pressure point which could lead to injury.
Zipper fully
closed and
zipper-pull
tucked into
cover.
9
Inside Cover
Outside Cover
Assembled
Cushion