Specific Safety Rules; Appliance Specifications; Environmental Protection; Environment Friendly Disposal - EQUATION PC26-AMF Manual De Instrucciones

Specific Safety Rules
The appliance shall be installed in accordance with national
wiring regulations.
Keep ventilation openings clear of obstruction.
Servicing shall be performed only as recommended by the
manufacturer. The appliance shall be stored so as to prevent
mechanical damage from occurring.
The method of connection of the appliance to the electrical
supply:
Do not operate the unit with a damaged plug or loose outlet.
Use only the correct power supply‐AC230V/50Hz.
Remove the plug from the socket if the unit is not going be used
for a long period of time.
Always turn the unit off and remove the power plug from the
socket when cleaning.
WARNING: Do not use means to accelerate the defrosting process or to
clean, other than those recommended by the manufacturer.
Do not pierce or burn.
Be aware that refrigerants may not contain an odour.
Environmental protection
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the non‐working
electrical equipments to an appropriate waste disposal centre. The
packaging material is recyclable. Dispose of the packaging in an
environmentally friendly manner and make it available for the recyclable
material collection‐service.
GB
66
Appliance specifications
Rated voltage
Rated frequency
Rated wattage
Refrigerant number
Refrigerant amount
Ambient operating temperature
Maximum operating pressure
Rated input power of heater
Protection class
IP number
Model
Fuse
ATTENTION
For effective heating and cooling functions, please ensure that the following steps
are undertaken:
1. Extend the exhaust hose to a length of not more than 400mm. The exhaust hose must
be kept parallel and must not be bent up or down.
2. A distance of 500mm minimum must be kept between the filter side of the unit and
wall or any other obstacles".
3. When this appliance starts to defrost, the word "DF" will be displayed on the LED
220‐240 V
50 Hz
1100 W
R410A
0.42kg
5‐35 °C
2
5.5MPa(55kgf/cm )
950W
I
IP24
PC26‐AMF
250V AC 2A F
67
GB