Preparation; Operation Instructions - Smartpond 70780 Manual Del Usuario

A

PREPARATION

Before beginning assembly or operation of product, make sure
all parts are present. Compare parts with package contents list
and diagram. If any part is missing or damaged, do not attempt
to assemble, install or operate the product. Contact Customer
Care for replacement parts.
• Estimated Assembly Time: 20 minutes
• Tools required for assembly: hacksaw, philipshead screwdriver.

OPERATION INSTRUCTIONS

Install the filter in a location that is at least 6.6-ft from the pond's edge
and is protected from flooding. The filter can be particially burried up to
approximately 2-in below the lid clamps. If you do not wish to burry the
filter is should be place on firm and level ground.
NOTE: The filter should not be exposed to direct sunlight (max. 104 °F).
NOTE: To power a water feature from the outlet of the filter, the water
feature can be no
more than 6.6-ft
above the lid.
NOTE: You
will need to be
able to access
the filter lid to
complete routinue
maintenance, so
ensure it is easily
accessible.
4
VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
B
D
E
At least
6.6-ft
C