Note:
Do not attempt to open or repair the unit without qualified electrician while it
is malfunctioned.
The following conditions may cause lower sensitivity:
• In very foggy nights, the sensitivity may be less due to moisture collecting
on the lens.
• In very hot days, the sensitivity may be less since high ambient temperature
is close to body temperature
• In very cold days when heavy clothing is dressed, especially the facial area
is covered, very little heat will be emitted from the body causing the unit to
be less sensitivity.
• Cleaning wipe with dry cloth only. Soap or rough cloth may damage the
detector lens.
Shielding Label
This label provides to cover the lens that would reduce detection range.
www.grupotemper.com
KDP8 - 2/3 wires detector
Motion detector wall switch
Instructions manual |
33