Technical Specifications - koban KDP8 2H Manual Del Usuario

Technical specifications

Rated Voltage
Load
Detection Angle
Mounting Height
LUX Adjustment
TIME Adjustment
Detection Area
Manual Switch
Operating
temperature
Environmental
Protection
Caution
A circuit breaker (250VAC, 10A) type C according to EN60898-1 of
loadⅠshall be installed in the fixed wiring for protection.
A circuit breaker (250VAC, 6A) type C according to EN60898-1 of loadⅡshall
be installed in the fixed wiring for protection.
Do not mount on conductive surface.
Do not open the enclosure frequently.
Turn off power when change the light sources.
High in-rush current would be caused when bulbs of certain brands burned
which might damage the unit permanently.
www.grupotemper.com
KDP8 - 2/3 wires detector
220 - 240V~50Hz
KDP8-2H:
Incandescent Lamp: 40 - 400W max.
HV Halogen Lamp : 40 - 400W max.
KDP8-3H: 8A max (cos φ=1) μ
Incandescent Lamp: 1600W max.
HV Halogen Lamp : 1000W max.
Fluorescent Lamp : 300VA max. (uncompensated)
LV Halogen Lamp : 300VA max. (uncompensated)
Motor : 1/10 HP.
180º
0.8 - 1.2M
Adjustable from 5LUX - ∞
Adjustable from 6sec - 12min.
8M in frontward, 4.5M in sideward.
MANUAL ON / AUTO / MANUAL OFF.
0ºC to +45ºC
IP20
Motion detector wall switch
Instructions manual | 19