Installation
Using a screwdriver, remove the speaker grille that is attached to
the fairing.
With the pod on a bench, unscrew the mounting screws to remove
the factory speaker from the factory pod.
Unplug the terminals to disconnect the speaker.
8
Step 3 - Speaker Installation
Prior to installing the speaker to the pod, there are alignment pins
on the pod that the speaker needs to line up to ensure proper fit.
Take the new Rockford speaker and slide the wire connectors over
the terminals.
NOTE: The smaller terminal is the positive (+) and the larger
terminal is the negative (-).
Secure the speaker to the factory pod using the factory hardware.
NOTE: Do not overtighten the mounting screws. Doing so can strip
the threads on the plastic pod.