AFETY T152S Only CAUTION: Before installation, disconnect the battery Removing tabs for negative (-) terminal to prevent damage some installations to the unit, fire and/or possible injury. Use pliers to break off Break off plastic tab. mounting tab. PRACTICE SAFE SOUND™ snap! Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss.
Página 3
EATURES PECIFICATIONS Discreet Dual Clamp (DDC™) T152-S T1652-S T1T-S T1 Components Tweeter Mount Nominal Diameter - inch (mm) 5.25 (133) 6.5 (165) 1.0 (25.4) Description Component System Component System Tweeter System Every aspect of the new Tweeter design has been completely re-engineered to allow for maximum Nominal Impedance (ohms) 4Ω...
Página 4
T152-S & T1652-S Component Wiring Tweeter On-Axis Tweeter Off-Axis Use illustration for proper connection. Be sure to maintain speaker polarity. Axis ON-OFF Switch Set to ON or OFF to match position of tweeter rela- tive to listener. Default OFF position satisfies most installations.
Français Español MISE EN GARDE : avant d'entamer l'installation, déconnectez la PRECAUCIÓN: Antes de la instalación, desconecte el terminal broche négative (-) de la batterie pour éviter tout risque de blessures, negativo de la batería (-) para prevenir daño a la unidad, incendio y/o d’incendie ou de dommages à...
Página 7
Deutsch Italiano ATTENZIONE: Prima dell'installazione, scollegate il terminale VORSICHT: Entfernen Sie vor dem Einbau den negative Batteriepol, negativo (-) della batteria per evitare danni all'unità, pericoli d'incendio um Schäden am Gerät, Feuer bzw. mögliche Verletzungen zu vermeiden. e/o potenziali lesioni personali. PRAKTIZIEREN SIE SICHEREN SOUND OSSERVATE LE REGOLE DEL “SUONO SENZA PERICOLI”...
Página 8
Français Deutsch Câblage du filtre T1T-S T1T-S Crossover-Verkabelung Voir le branchement correct sur l'illustration. Zum ordnungsgemäßen Anschließen die Illustration benutzen. Veillez à maintenir la polarité du haut-parleur. Dabei die Lautsprecherpolarität beachten. Das Anschließen des positiven Drahts an 0 dB stimmt die Amplitude des Hochtöners auf Le branchement du fil positif à...
Página 9
Remove Shaded Area From Adapter Plate for T152-S Shallow Mount Spacer Plate Adapter Plate Template 6.5" Hole Mounting Remove Shaded Areas Mounting for T152-S 5.25"...
Página 10
Adapter Plate Template – 6"x9" Hole Mounting For 5"x7" Hole Mounting - Remove Dark Shaded Areas Mounting for T152-S 5.25" Remove For Tweeter Remove Shaded Areas to Mount T1652-S 6.5"...