Steamfast Sidekick SF-320 Manual Del Propietário página 9

FILLING WATER TANK
1. Place Sidekick™ Steam Cleaner on a flat, level surface.
2. Make sure Steam Control Dial is in "off" position (turned counter-clockwise as far as possible)
and power cord is unplugged from electrical outlet.
3. Cautiously remove Water Tank Cap by unscrewing it in a counter-clockwise direction, and lift it off.
4. Water Tank should always be emptied after each use. If it was not emptied after the previous
use, empty it now – this will make it easier to fill with the correct amount of water.
5. Fill Measuring Cup to maximum fill line (16 oz / 473 ml) with water.
NOTE: In order to significantly reduce mineral build-up and prolong the life of your
Sidekick™ Steam Cleaner, use of distilled or de-mineralized water in the unit is highly
recommended. Refer to Page 11 for more information about mineral build-up.
6. Carefully pour water from Measuring Cup into Water Tank through fill hole.
7. Depending on how long you intend to steam, you may repeat STEPS 5 & 6 one more time to fill
Water Tank to maximum capacity.
NOTE: Do not exceed the Water Tank's maximum capacity of 33 oz (976 ml). This will
ensure optimum flow of steam with minimal dripping water.
8. Replace Water Tank Cap, screwing it in a clockwise direction to tighten. Make sure it is
screwed on securely to prevent hot water or steam from escaping.
Using Your
Sidekick™ Steam Cleaner
9