Steamfast Sidekick SF-320 Manual Del Propietário página 7

WARNING: Do not try to connect accessories while unit is emitting steam.
UTILITY BRUSHES
NOTE: The Nylon Utility Brush and Brass Utility Brush are all attached in the same
manner. The Nylon Utility Brush is illustrated in FIGURE 3 as an example.
1. Align selected Utility Brush with Jet Nozzle. Guide key inside of Utility Brush should line up
with key slot on Jet Nozzle tip (FIGURE 3-A).
2. Firmly press Utility Brush onto Jet Nozzle (FIGURE 3-B).
CAUTION: Make sure Utility Brush is pushed as far as possible onto Jet Nozzle tip to
ensure that it is seated securely. This will eliminate steam leaks and prevent Utility
Brush from being forced off of Jet Nozzle by steam pressure.
SCRUB TOOL
1. Place Scrub Pad over tip of Jet Nozzle, and firmly press it on to
Jet Nozzle as far as possible (FIGURE 4). This will help to prevent
steam leakage.
2. To remove Scrub Pad, simply grip it firmly and pull it off of Jet Nozzle.
GUIDE KEY
KEY SLOT
FIGURE 3
3-A 3-B
FIGURE 4
7