Steamfast Sidekick SF-320 Manual Del Propietário página 6

WARNING: Do not try to connect accessories while unit is emitting steam.
JET NOZZLE / SQUEEGEE / CORNER TOOL
1. Select one of the three accessories (Jet Nozzle, Squeegee or Corner Tool – Jet Nozzle shown
as example), and align rear end of accessory with Steam Nozzle. Rectangular hole in selected
accessory should align with blue lock/release button on Steam Nozzle.
2. Press down on blue lock/release button (FIGURE 4-A). While continuing to hold button down,
slide accessory onto Steam Nozzle (FIGURE 4-B). Push accessory over button, and continue
pushing until button snaps through rectangular hole.
CORNER TOOL PADS
NOTE: This procedure applies to the Corner Tool Scrub Pad and Corner Tool Sponge Pad.
1. Swing Corner Tool latch arm to open position (FIGURE 2-A).
2. Press desired pad against Corner Tool. The pad should wrap around angled edge, covering all
steam holes (FIGURE 2-B).
3. While continuing to hold pad against Corner Tool, swing latch arm over pad to locked position.
This will secure the pad in place (FIGURE 2-C).
2-A
6
Assembling Your
Sidekick™ Steam Cleaner
1-A
1-B
FIGURE 1
2-B
FIGURE 2
2-C