Attaching The Fan Blades - HAMPTON BAY 68144 Guía De Uso Y Cuidado

Assembly - Attaching the Fan Blades (continued)
2

Attaching the fan blades

NOTE: Your fan features revolutionary advancements
for quick and easy blade installation.
NOTE: Your fan blades are reversible. Select the
blade side finish which best accentuates your decor.
□
Mount the fan blades (J) to the blade bracket (I) by aligning
the three key-slot holes in the blade (J) with the three posts
on the top of the blade brackets (I).
□
Hold the blade (J) close to the blade bracket (I) and press
the blade (J) down firmly. Ensure the key-slot holes are
properly seated on the blade arm posts.
□
While still holding the blade (J) down, firmly slide the blade
(J) away from the bracket (I) side until the blade (J) engages
in the locking mechanism (SS).
□
Make sure the locking mechanism (SS) at the rear of the
blade bracket (I) springs upward and butts against the edge
of the blade (J) indicating a secure connection.
□
Visually inspect the top of the blade bracket (I) to ensure the
locking mechanism (SS) is securely in place.
□
Repeat for the remaining blades (J).
Assembly - Attaching the Light Kit
1
Attaching the light kit
WARNING: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (QQ) from the light kit fitter
assembly (G).
□
Connect the wires exiting the bottom of the motor assembly
(F) by connecting the molded adaptor plugs together (blue to
blue, and white to white).
□
Slide the light kit (G) and secure it to the switch housing
using the three screws (QQ) that were removed in the first
step.
12
J
I
SS
F
QQ
G