Connecting A Motor Drive; E - Monitor User Manual; Button Functions - Extel Code 720309 Guía De Instalación Y De Uso

D - INSTALLATION
For wiring, refer to the reverse of the panel and the diagram in Fig. 7.
Important:
• The maximum distance between the intercom panel and the electric strike plate or electric lock is 50
m maximum. The wire size to be used is 0.75 mm².
• The use of a 12 V/1.1 A max. electric strike plate with WECA mechanical memory (Extel reference
109021 or 109031) or WECA 5001/2 10 SER R1 (reference 150011) is recommended.

4 - CONNECTING A MOTOR DRIVE

Directly connect the strike plate or lock wires to terminals 5 and 6 on the back of the panel (no polarity
to adhere to).
Note that this function is only valid if the screen is on. The panel provides a "dry" contact connection,
without an electric current, to connect to the button for your automated gate. For wiring, refer to the
reverse of the panel and the diagram in Fig. 7.
Important:
• This function is only valid if the screen is on
• The maximum distance between the intercom panel and the gate motor drive is 50 m maximum.
The wire size to be used is 0.75 mm².
• The product has been tested and approved with Thomson "Sésame" or "Swip" gate motor drives
which can be found at maisonic.fr

E - MONITOR USER MANUAL

The Extel Code videophone is controlled through touch-sensitive keys. The button functions vary
depending on the menu accessed. The icons at the bottom of the screen help to guide you as to their use

1 - BUTTON FUNCTIONS

1
Screen off: Access to time screen
Time screen: intercom panel preview
1
(surveillance mode)
Menu : left arrow or up arrow
Duringcommunication: starts/ends
a call (where applicable: this action will
automatically turn off the second family
screen)
2 Time screen: starts a call to the second
family screen
In surveillance mode: initiates
communication
Menu: right arrow or down arrow
EN4
2 3
3
4
5
Extel - Code - 720309-720311
+
Master
4
Screen off: Access to the time and then the
menu by pressing again
Screen off– button flashing: access to
photos of visitors when absent
Menu: OK (selection button)
Call in progress: takes a photo
Call in progress: opens the electric strike
plate
Call in progress: opens the dry contact
(gate motor drive)
Menu: back/exit (back button to parent
menu)
Slave
5