Samson 160 100 Guía De Servicio Técnico Y Recambios

GB
SAFETY INSTRUCTIONS
Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury. Please read carefully.
WORK AREA
1. Keep your area clean and well lit. Cluttered benches and dull areas may
cause accidents.
2. Do not operate power tools in explosive atmospheres such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
that may ignite the materials.
3. Keep bystanders, children and visitors away while operating a power
tool. Distractions can lead you to lose control.
ELECTRICAL SAFETY
1. Avoid body contact with grounded surfaces such as pipes, couplers.
There is an increased risk o electric shock if your body is grounded.
2. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
PERSONAL SAFETY
1. Stay alert. Watch what you are doing, and use common sense when
operating a power tool. Do not use a power tool while tired or under
the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
2. Dress properly. Do not wear loose clothing o jewelry or long hair can
be caught in moving parts.
3. Avoid accidental starting. Be sure the switch is released before
plugging in. Carrying power tools with your finger on the trigger, or
plugging in power tools with the trigger depressed, invites accidents.
4. Remove adjusting keys or wrenches before turning the power tool on.
A wrench or a key that is left attached to a rotating part of the power
tools may result in personal injury.
5. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the power tool in
unexpected situations.
6. Use safety equipment. Always wear ANSI approved safety glasses
underneath a full face safety shield. Dust mask, nonskid safety shoes,
hard hat or hearing protection must used for appropriate conditions.
Samson Corporation • One Samson Way • N.C. 28778 Swannanoa USA • Phone (828) 686-8511 • Fax (828) 686-8533
18 V HEAVY DUTY GREASE GUN
PISTOLA DE ENGRASE ELECTROPORTÁTIL
PISTOLET DE GRAISSAGE ÉLECTRIQUE À BATTERIE
AKKU - FETTPRESSE
Parts and technical service guide
Guía de servicio técnico y recambios
Guide d'utilisation et pieces de rechange
Bedienungsanleitung
Warning / Atención / Attention / Achtung
WARNING
Do not use battery charger in damp or wet locations. Do not use the
grease gun or charger if it has been dropped, damaged, left outdoors or
immersed in liquid. To avoid electrical shock, do not handle the charger,
its power cord plug or the grease gun with wet hands.
Grease gun can develope high pressure - up to 8.000 psi. Use safety glasses
and gloves for protection during operation. Keep hands clear of the
exposed rubber portion of hose.
You should never interchange battery packs and/or battery chargers
amongst the Ni-MH (160 100) and the Li-ION versión (160 101).
Extreme pressure may cause nozzle extension or flex hose to burst. Use
only approved hoses and follow whip hose instructions and warnings.
You will need this manual for the safety warnings and precautions,
assembly, operating, maintenance and cleaning procedures.
Part No. / Cód. / Rèf. / Art. Nr.:
160 100
160 101
SAVE THIS MANUAL
R. 01/14 816 807
1