M en saj es de error
Si hay un mensaje de error, la luz de ERR LED alumbrará,el Panel
de Modo de indicador la pantalla de codigo de error.
Por favor use la descripcion de mensajes de error en esta pagina
para resolver problemas.
Error codes
Error 0
Cannot detect Micro
SD card
Error 1
Other Micro SD Card
error
Error 2
Icode Verification
Failure
Error 3
FRAM error
Error 4
Connection error
Error 5
RTC error
Error 6
Other hardware error
Description
Check if a micro SD card is present in the SD card slot, or if one has been
installed incorrectly.
Correctly insert a micro SD card.
(Please see P.9 Micro SD card check)
Check if the printer can read the micro SD card.
Please reinstall the Micro SD card.
(Please see P.9 Micro SD Card check )
Check if an ink cartridge is present or if one has been properly installed.
Please install an ink cartridge or reinstall the ink cartridge.
(Please see P.8 Ink Cartridge Installation)
Check if the ink cartridge is a genuine HP cartridge.
Please use a genuine HP cartridge.
(Please see P.6 Parts and Accessories)
Check if the battery is low.
Please charge the rechargeable batteries using either the provided battery
charger or the provided AC power adapter.
(Please see P.10 Turning on the Printer, P.11 AC power and P.40 Low
Battery)
Check if the battery is low.
Please charge the rechargeable batteries using either the provided battery
charger or the provided AC power adapter.
(Please see P.10 Turning on the Printer, P.11 AC power and P.40 Low
Battery)
If the error message cannot be resolved when the batteries are fully
charged, please consult the distributor.
Check if you are using the USB cable provided with the printer.
Please use the USB cable from the original package.
(Please see P.6 Parts and Accessories)
This may be caused by a low internal battery level.
Please contact the distributor to resolve the error.
This may be the result of internal hardware damage.
Please contact the distributor to resolve this error.
RUN
ERR
INK
BAT
PWR
42