Oiling The Air Filter; Gear; Cutting Unit; Cleaning And Lubrication - Jonsered HT2218 Manual De Instrucciones

Ocultar thumbs Ver también para HT2218:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Oiling the air filter
Always use special filter oil. Filter oil contains a solvent to
make it spread evenly through the filter. You should
therefore avoid skin contact.
Put the filter in a plastic bag and pour the filter oil over it.
Knead the plastic bag to distribute the oil. Squeeze the
excess oil out of the filter inside the plastic bag and pour
off the excess before fitting the filter to the machine. Never
use common engine oil. This would drain through the filter
quite quickly and collect in the bottom.

Gear

There is a plug for filling lubricant on the gear housing.
Use the grease tube to fill with grease and repeat every
25 hours. Use Jonsered's special grease.
CAUTION! The gear housing must not be filled
completely with grease. The grease expands as the
machine heats up during operation. If the gear housing
was completely filled with grease it could damage the
seals and lead to leakage of grease.
The grease in the bevel gear does not normally need to
be changed except if repairs are carried out.

Cutting unit

Check that the cutting units' screws are fitted correctly.
Tighten them with a tightening torque of 7-10 Nm.
18 – English
MAINTENANCE

Cleaning and lubrication

Clean any resin and plant residue from the blades using
cleaning agent 531 00 80-04 (SMÖRJA) before and after
using the machine.
Check that the blade edges are not damaged or
deformed. File away any burrs.
Check that the blades move freely. Remove the
lubrication plug in the gear housing and stick in the
combination spanner and turn back and forth.
Lubricate the blade bars with special grease, part no. 531
00 80-05 (SMÖRJA EXTRA) before long periods of
storage.
IMPORTANT! Use only JONSERED replacement parts.
Use of other brands of replacement parts can cause
damage to your unit or injury to the operator or others.
Your warranty does not cover damage or liability caused
by the use of accessories and/or attachments not
specifically recommended by JONSERED.
Tabla de contenido
loading

Este manual también es adecuado para:

Ht2223t

Tabla de contenido