Haven ISOtunesPRO Manual Del Usuario página 6

Battery Capacity Status
ISOtunes PRO supports iOS Bluetooth
™
This means that when connected to iOS devices, the battery power
status can be seen in the upper right corner of the screen.
Charging
We recommend charging your ISOtunes PRO
use. Use the included USB charger to connect to the micro-USB
port on the controller of the headphones. A red LED indicates your
headset is charging, while a blue LED indicates the charging has
finished. When the battery is low, the indicator light will flash red,
accompanied by periodic beeps.
battery level indicator.
®
fully before its first
™
DualConnect Function
ISOtunes PRO is capable of connecting with two Bluetooth
™
enabled mobile phones at the same time.
To pair with two devices simultaneously:
1. From OFF mode, press and hold the multifunction button until the
indicator light flashes red and blue alternately, entering pairing
mode. Pair with phone A.
2. Power off your ISOtunes PRO
process with phone B.
3. After pairing with phone B, power off the headphones again.
4. Then, power on your ISOtunes PRO
connect to its most recently paired device, phone B.
5. Press both the 'volume up' and 'volume down' buttons
simultaneously, twice in a row. Your ISOtunes PRO
connected to both mobile phones.
-
®
and then repeat the pairing
™
again. It should automatically
™
will now be
™