Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating Your ISOtunes PRO
Headphones
Operation
LED Status
Power On
Blue LED flashes 2 times slowly, then 2 times quickly twice
Power Off
Red LED flashes 4 times
Pairing
Red LED & Blue LED flash alternately
Standby
Blue LED flashes 3 times quickly every 5 seconds
Incoming Call
Blue LED flashes continuously
Low Battery
Red LED flashes once per second
Charging
Red LED stays on during charging
Blue LED indicates charging is finished
™
On / Off
Press and hold the multifunction button for 2 seconds. A blue LED
will flash two times slowly, then two times quickly twice in a row,
indicating the headphones are powered on.
Press and hold the multifunction button for 3 seconds. A red LED will
flash slowly 4 times, indicating the headphones are now powered off.
Bluetooth Pairing
Make sure the headphones are powered off. Press and hold the
multifunction button for 5 seconds to enter into pairing mode, at
which time red and blue lights will flash alternately. Activate your
phone or device's Bluetooth
and select. If a PIN is required, enter "0000" to connect.
After powering off and powering back on again, ISOtunes PRO
automatically reconnect with its paired device, if in range.
function, search for ISOtunes PRO
®
™
will
™
Tabla de contenido
