Before You Begin
Unpack the system and verify the contents. See Chapter 1 for instructions.
Unpack the accessory box and place the slide assemblies, mounting brackets, and
hardware on a clear surface.
Verify that you have the components and hardware shown in "Accessory Box
Contents" on page en-4.
Read the rack enclosure requirements described in Appendix A of this guide.
Read the Safety Precautions that follow.
Safety Precautions
For a complete description of the safety precautions to follow when installing a Sun
Enterprise 220R server, see the Sun Enterprise 220R Server Owner's Guide.
Caution – Install the system as low as possible into the rack enclosure. For best
!
stability, do not install the system above equipment that weighs less than it does.
Caution – The system is heavy. In the following procedures, two people are
!
required to move the system. Two people are also required to align and install the
slide assemblies into the rack.
en-8
Sun Enterprise 220R Server Setup and Rackmounting Guide • December 1999