English; Getting Started; Power On/Off - Kensington Presentair Manual De Inicio Rápido

English

Getting Started

1 Charge your Presentair™ Bluetooth
Presenter Remote on any USB port or
charging adapter for 2 hours before
initial use or when the front LED blinks
orange, indicating the battery is low.
a
b
OR
NOTE: This device has USB charging
function only, and will not appear on
your system as a data device when
plugged into a USB port.
2 The Rear LED blinks orange during
charging. When the Presenter Remote
is fully charged, the Rear LED glows
solid orange.
* Power supply not included
*
4

Power On/Off

1 From On State—To Turn Power Off
Press and hold the Power Button.
The Presentair rear blue LED blinks
rapidly. Release button, the LED fades
off and the power turns off.
2a From Off State—To Turn Power On
Press the Power Button for 1 second
and release. The blue LED glows, the
power turns on, then the LED turns off.
2b From Off State—To Pair Device
Press and hold the Power Button from
3 to 6 seconds. The blue LED blinks
slowly and Presentair enters Pairing
Mode. Release button, it stays in
pairing mode for 3 minutes or until
paired to a device.
Blue LED
Power Button
Power On/Off and
Bluetooth pairing
OR
5