Proper Use; Technical Data - EINHELL TC-BD 500 Manual De Instrucciones Original

Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Pillar drill
•
Chuck
•
Folding chip guard
•
Original operating instructions
•
Safety instructions

3. Proper use

This pillar drill is designed for drilling metal, plas-
tic, wood and similar materials. It is intended for
use in the private sector only.
Food and harmful materials are not allowed to be
processed with the machine. The drill chuck is de-
signed for use only with drill bits and tools with a
shaft diameter of 1.5 to 13 mm, and for cylindrical
tool shanks. Tools with a tapered shank can also
be used. The equipment is intended for use by
adults only
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Rated input voltage .................230-240V ~ 50 Hz
Power rating .................................500 W S6 40%
Motor speed ........................................1480 min
Output speed ............................ 300 - 2410 min
Drill chuck mount ......................................... B 16
Scroll chuck ..................................Ø 1.5 - 13 mm
Reach .................................................... 115 mm
Dimensions of drill table ................ 170 x 170 mm
Table angle adjustment ................... 45° / 0° / 45°
Drilling depth ............................................ 50 mm
Pillar diameter .......................................... 46 mm
Anl_TC_BD_500_SPK13.indb 18 Anl_TC_BD_500_SPK13.indb 18
GB
Height .................................................... 620 mm
Base area ..................................... 200 x 315 mm
Weight ............................................ approx. 15 kg
Operating mode S6 40%: Continuous operation
with idling (cycle time 10 minutes). To ensure that
the motor does not become excessively hot, it
may only be operated for 40% of the cycle at the
specifi ed rating and must then be allowed to idle
for 60% of the cycle.
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L sound pressure level ..................... 70.8 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 83.8 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
-1 •
Only use appliances which are in perfect wor-
-1
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
- 18 -
16.12.2020 10:04:53 16.12.2020 10:04:53