Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly (continued)
ATTACHING HARDWARE
ONTO THE SIDE PANELS
1. Locate the left and right side panels (E & F)
and place them on a soft surface to protect
the finish.
2. Insert long connectors (CC) into the left and
right side panels (E & F) where indicated.
Press down firmly until flush.
3. Attach the long connectors (CC) by
inserting and turning four bolts (AA)
clockwise. Do not strip the bolts (AA) by
overtightening.
4. Attach the four door hinge plates (GG)
to the left and right side panels (F & F) by
inserting and tightening sixteen hinge screws
(JJ). Do not overtighten and strip the hinge
screws (JJ).
ATTACHING THE SIDE PANELS
1. Insert eight wood dowels (DD) into the
unthreaded holes in the sides of the media
shelf (B) and the base panel (C).
2. Line up the wood dowels (DD) in the sides
of the media shelf (B) and the base panel
(C) with the unthreaded holes in the left
and right side panels (E & F).
3. Line up the long connectors (CC) in the
media shelf (B) and the base panel (C)
with the holes in the left and right side
panels (E & F).
4. Press the left and right side panels (E & F)
firmly until flush with the media console
assembly.
5. Attach the left and right side panels to the
media console assembly by inserting eight
bolts (AA) through the long connectors
(CC) in the media shelf (B) and the base
panel (C) and turning clockwise. Do not
strip the bolts (AA) by overtightening.
8
JJ
GG
E
AA
CC
E
F
B
C
CC
AA
DD
F
Capítulos
Tabla de contenido
