Safety Instructions - Denon Professional DN-500DC Guia Del Usuario

User Guide (English)
Introduction
Please see this guide's
system, and then refer to the
Box Contents
DN-500DC
Power Cable
Rack Ears and Screws
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denonpro.com.

Safety Instructions

Before turning the power
on:
Proper ventilation:
About condensation:
Cautions on using mobile
phones:
Moving the unit:
About care:
Rackmount warnings:
(required rack specifications for
mounting the unit in a rack)
Rack installation:
Setup chapter to learn how to integrate DN-500DC with your audio
Operation chapter to start using DN-500DC.
Make sure all connections are secure and correct and that there are
no problems with the connection cables.
Power is supplied to some of the circuitry even when the unit is
powered off. When the unit will not be used for long periods of time,
disconnect the power cable from the power outlet.
If the unit is left in a room which is not properly ventilated or is full of
smoke from cigarettes, dust, etc. for long periods of time, the surface
of the optical pickup may get dirty, causing incorrect operation.
If there is a major difference in temperature between the inside of the
unit and the surroundings, condensation may form inside the unit,
causing the unit not to operate properly. If this happens, let the unit
sit for an hour or two while powered off, and wait until there is little
difference in temperature before using the unit.
Using a mobile phone near this unit may cause noise. If this occurs,
move the mobile phone away from this unit when it is in use.
Before moving the unit, turn off its power and disconnect the power
cable from the power outlet. Next, disconnect its connection cables
from other devices before moving it.
Wipe the cabinet and control panel clean with a soft cloth.
Follow the instructions when using a chemical cleaner.
Do not use benzene, paint thinner, insecticide, or other organic
solvents to clean the unit. These materials can cause material
changes and discoloration.
EIA standard 19-inch (48.3cm) rack
1U-size installation compatible rack
Rack that has a guide rail or shelf board that
can support this device
This product will work normally when the player
unit is mounted within 10° off the vertical plane
at the front panel. If the unit is tilted excessively,
the disc may not load or unload properly. (See
image.)
Remote Control
User Guide
Safety & Warranty Manual
Maximum
10°
Unit
3