User Guide (English)
Introduction
Box Contents
DN-300UI
Rack Ears with Screws
Power Cable
Remote Control
Safety Instructions
Please also see the included Safety and Warranty Manual for more information.
Before turning the power on:
Proper ventilation:
About condensation:
Cautions on using mobile
phones:
Moving the unit:
About care:
Rackmount warnings:
(required rack specifications for
mounting the unit in a rack)
Rack installation:
2
Wireless LAN Antenna
FM Indoor Antenna Cable
User Guide
Safety & Warranty Manual
Make sure all connections are secure and correct and that there
are no problems with the connection cables.
Power is supplied to some of the circuitry even when the unit is
powered off. When the unit will not be used for long periods of
time, disconnect the power cable from the power outlet.
If the unit is left in a room which is not properly ventilated or is full
of smoke from cigarettes, dust, etc. for long periods of time, the
surface of the optical pickup may get dirty, causing incorrect
operation.
If there is a major difference in temperature between the inside of
the unit and the surroundings, condensation may form inside the
unit, causing the unit not to operate properly. If this happens, let
the unit sit for an hour or two while powered off, and wait until there
is little difference in temperature before using the unit.
Using a mobile phone near this unit may cause noise. If this occurs,
move the mobile phone away from this unit when it is in use.
Before moving the unit, turn off its power and disconnect the power
cable from the power outlet. Next, disconnect its connection cables
from other devices before moving it.
Wipe the cabinet and control panel clean with a soft cloth.
Follow the instructions when using a chemical cleaner.
Do not use benzene, paint thinner, insecticide, or other organic
solvents to clean the unit. These materials can cause material
changes and discoloration.
EIA standard 19-inch (48.3cm) rack
1U-size installation compatible rack
Rack that has a guide rail or shelf board that can support this
device.
This product will work normally when the
player unit is mounted within 10° off the
vertical plane at the front panel. (See image.)
Support
For the latest information about
this product (system requirements,
compatibility
information,
and
product
registration,
denonpro.com.
Maximum
etc.)
visit
10°
Unit