Service Menu - Lamborghini Caloreclima SILVER 24C Instrucciones De Uso, Instalación Y Mantenimiento

Contents Description Range
b10 Summer/Winter button opera- 0=Enabled
tion selection
1=Disabled
b11 Variable input contact opera- 0=Flowmeter
tion selection (b02=1) exclusion
1=System ther-
mostat
2=Second room
therm.
Variable input contact opera- 0=Economy/Com-
tion selection (b02=2) fort
1=Continuous
Comfort
2=Second room
therm.
Variable input contact opera- 0=Flowmeter
tion selection (b02=3) exclusion
1=System ther-
mostat
2=Second room
therm.
Variable input contact opera- 0=Economy/Com-
tion selection (b02=4) fort
1=Continuous
Comfort
2=Second room
therm.
b12 Not implemented (b02=4)
b13 Relay card LC32 operation 0=External gas
selection (b02=1) valve
1=Alarm
2=System filling
solenoid valve
3=Solar 3-way
valve
4=Second heat-
ing pump
5=Alarm2
Relay card LC32 operation 0=External gas
selection (b02=2) valve
1=Alarm
2=System filling
solenoid valve
3=Pump for
Legionella protec-
tion
4=Second heat-
ing pump
5=Alarm2
Relay card LC32 operation 0=External gas
selection (b02=3) valve
1=Alarm
2=System filling
solenoid valve
3=Solar 3-way
valve
4=Second heat-
ing pump
5=Alarm2
No effect on adjustment
(b02=4)
b14 Hours without DHW drawn 0-24hours
(b02=1)
No effect on adjustment 0-24hours
(b02=2)
Hours without DHW drawn
0-24hours
(b02=3)
No effect on adjustment
(b02=4)
b15 Fault 20Selection status 0=Disabled
1=Enabled
24
EN
Default SILVER 24C SILVER 34C
0=Enabled 0=Enabled 0=Enabled
0=Flowmeter
exclusion
0=Economy/Com-
fort
0=Flowmeter 0=Flowmeter 0=Flowmeter
exclusion exclusion exclusion
0=Economy/Com-
fort
-- -- --
0=External gas
valve
0=External gas
valve
0=External gas 0=External gas 0=External gas
valve valve valve
-- -- --
24hours
24hours
24hours 24hours 24hours
24hours
0=Disabled 0=Disabled 0=Disabled
cod. 3541I680 - Rev. 01 - 09/2016
Contents Description
b16 Fumes Max Temperature
b17 Mains Voltage Frequency
b18 Comfort burner on time
(b02=1)
Not implemented (b02=2)
Not implemented (b02=3)
Not implemented (b02=4)
b19 Flowmeter timing (b02=1)
No effect on adjustment
(b02=2)
Flowmeter timing (b02=3)
No effect on adjustment
(b02=4)
b20 Fan type selection
b21 Pump antiblock operation time 0-20seconds
b22 Hydraulic unit configuration
--
b23 DHW demand type selection 0=Flowmeter
Notes:
1. Parameters with more than one description vary their function and/or range in rela-
tion to the setting of the parameter given in brackets.
2. Parameters with more than one description are reset to the default value if the pa-
rameter given in brackets is modified.
To exit the configuration Menu press the DHW buttons together for 10 seconds, or exiting
occurs automatically after 2 minutes.

Service menu

The card Service Menu is accessed by pressing the Reset button for 20 seconds. 4 sub-
menus are available: press the Heating buttons to select, in increasing or decreasing or-
der, "tS", "In", "Hi" or "rE". "tS" means Transparent Parameters Menu, "In" means
Information Menu, "Hi" means History Menu: after selecting the submenu, press the Re-
set button again to access it; "rE" means History Menu Reset: see description.
"tS" - Transparent Parameters Menu
31 parameters are available, indicated by the letter "P", which are not modifiable from
Remote Timer Control.
Press the Heating buttons to scroll the list of parameters in increasing or decreasing or-
der. Press the DHW buttons to view or modify the value of a parameter: the modification
will be automatically saved.
Contents Description
Ignition Power (b02=1)
Ignition Power (b02=2)
P01
Ignition Power (b02=3)
Ignition Power (b02=4)
P02 Heating ramp
No effect on adjustment
(b02=1)
No effect on adjustment
(b02=2)
P03
No effect on adjustment
--
(b02=3)
No effect on adjustment
(b02=4)
P04 Heating standby time
P05 Heating post-circulation
P06 Pump operation
P07 Modulating pump min. speed 0-100%
P08 Modulating pump start speed 0-100%
P09 Modulating pump max. speed 0-100%
SILVER 24C - 34C
Range Default SILVER 24C
0-125°C 100°C 100°C
0=50Hz 0=50Hz 0=50Hz
1=60Hz
0-40seconds 15seconds
-- --
-- -- --
-- --
0=Disabled 0=Disabled
1-10=seconds
0=Disabled 0=Disabled
1-10=seconds
0=Disabled 0=Disabled 0=Disabled
1-10=seconds
0=Disabled 0=Disabled
1-10=seconds
0=Sit 0=Sit 2=Ebm NRV
1=Ebm NRG
2=Ebm NRV
5seconds 5seconds
0=Stepper motor 0=Stepper motor 0=Stepper
valve valve motor valve
1=230Vac valve
0=Flowmeter (450 0=Flowmeter
(450 imp/l) imp/l) (450 imp/l)
1=Flowmeter
(700 imp/l)
Range Default SILVER 24C
0-100% 40%
0-100% 40%
0-100% 40% 40%
0-100% 40%
1-10°C/minute 2°C/minute 2°C/minute
20-80°C 35°C
20-80°C 35°C
20-80°C 35°C 35°C
20-80°C 35°C
0-10minutes 4minutes 4minutes
0-255minutes 15minutes 15minutes
0-7=Operation strategy 0 4
30% 30%
75% 75%
100% 100%
SILVER 34C
100°C
0=50Hz
--
0=Disabled
2=Ebm NRV
5seconds
0=Stepper
motor valve
0=Flowmeter
(450 imp/l)
SILVER 34C
40%
2°C/minute
35°C
4minutes
15minutes
4
30%
75%
100%