General Specifications - Klein Tools CL360 Manual De Instrucciones

ENGLISH
Klein Tools CL360 is an automatically ranging true root mean square
(TRMS) digital open jaw fork meter that measures AC current via the
fork, AC/DC voltage, continuity, and resistance via test-leads, and can
detect the presence of voltage via the integrated non-contact voltage
(NCV) tester.
• Operating Altitude: <6562 ft. (2000m)
• Relative Humidity: <80% non-condensing
• Operating Temp: 32° to 122°F (0° to 50°C)
• Storage Temp: -4° to 140°F (-20° to 60°C)
• Dimensions: 8.39" x 2.12" x 1.38" (213 x 54 x 35 mm)
• Weight: 7.3 oz. (208 g) including batteries
• Calibration: Accurate for one year
• Standards: IEC EN 61010-1, 61010-2-032, 61010-2-033.
• Accuracy: ± (% of reading + # of least significant digits)
Values stated at 65° to 83°F (18° to 28°C), Temp Coefficient:
0.1 x (Quoted Accuracy) per °C above 28°C or below 18°C,
corrections are required when ambient working temp is
outside of Accuracy Temp range
• Batteries: 2 x 1.5V AAA Alkaline (included)
• Drop Protection: 9.8 ft. (3m)
• Ingress Protection: IP40 dust resistant
• Pollution Degree: 2
• Safety Rating:
Jaw & Housing: CATIV 600V / CATIII 1000V
Electrical & Protection Circuit: CATIII 600V / CATII 1000V
Class 2, Double insulation
CAT II: Measurement Category II is applicable to test and measuring
circuits connected directly to utilization points (socket outlets and
similar points) of the low-voltage MAINS installation.
CAT III: Measurement category III is applicable to test and measuring
circuits connected to the distribution part of the building's low-
voltage MAINS installation.
CAT IV: Measurement category IV is applicable to test and measuring
circuits connected at the source of the building's low-voltage MAINS
installation.
• Electromagnetic Environment: IEC/EN 61326-1. This
equipment meets requirements for use in basic and controlled
electromagnetic environments like residential properties,
business premises, and light-industrial locations.
Specifications subject to change.
2

GENERAL SPECIFICATIONS

IEC EN 61326-1, 61326-2-2.
Conforms to: UL 61010-1, UL 61010-2-032,
UL 61010-2-033.
Certified to: CAN/CSA C22.2 NO. 61010-1,
61010-2-032, 61010-2-033.