Kitchen Brains TRACKER 42 Guia De Funcionamiento página 5

Operating a TRACKER ™ Multi-Display Timer
OPERATING THE TIMER
dISPLAy dESCRIPTIONS
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Kitchen Brains © 2012 | www.KitchenBrains.com | 229-51277 G
Holding Times
If the timer has holding times, they will automatically start counting upon expiration of the
timing cycle.
When there is an active hold time, the display will toggle between
The timer is in the Operating Mode and the timer is ready to start a timing cycle.
The timer is in the Operating Mode; a timing cycle is in progress. If the colon between the
numbers is flashing, the timer is in minutes/seconds timing mode. If the colon is lit steady,
the timer is in hours/minutes timing mode.
The timer is in the Operating Mode; a timing cycle has been completed.
The timer is in the Operating Mode; a hold time is active, displaying hold number and time
remaining in minutes, or a hold time has expired and hold time is displayed.
Choose between auto and manual canceling alarms.
The timer is in Programming Mode.
The timer is in Sound Level 2.
Choose from a library of words.
Create a word by selecting letters.
The timer is in Programming Mode for setting the alarm sound.
The timer is in count down mode.
The timer will count down each timing stage separately.
(this is the time remaining
in the hold cycle)
Page 5 of 32