Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating a TRACKER
™
Multi-Display Timer
CONNECTING TRACKER TO TRACKER
Setting Master to RQI
Communications
NOTE: Addresses shown are
examples only.
Setting Master to None
NOTE: Addresses shown are
examples only.
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Kitchen Brains © 2012 | www.KitchenBrains.com | 229-51277 G
Master to RQI (Remote Quality Indicator)
An RQI is a small device that displays the hold time of a master only.
Programming the Master (No programming of the RQI units is necessary.)
OR
Press both keys
to modify the address
at the same time
number of the Master
and hold for 3
seconds
Currently
programmed
address is
displayed
None
If none is selected, no communication in or out is made
Programming the Master
OR
Press both keys
to modify the address
at the same time
number of the Master
and hold for 3
seconds
Currently
programmed
address is
displayed
OR
to set
to change to Remote
change the Remote
remote
RQI
RQI address to a
mode
different number
NOTE: Options
are QILA (left A),
QILB (left B), QIRA
(right A), and QIRB
(right B). Each one
should be set to a
different number.
OR
to set
to change to None
to complete
remote
programming the
mode
Master and return to
idle mode
OR
to complete
programming
the Master and
return to idle
mode
Page 14 of 32
Tabla de contenido
