Cable Association Procedure - TRUlink 81663 Guia Del Usuario

A
PPENDIX
C A P
ABLE SSOCIATION
Cable association steps: Examples/Figures shown used with the association of the TruLink Wireless VGA
Device Adapter
1. Make sure that the Wireless USB Manager is running. Check your Windows tray for the Wireless USB
Manager icon (Figure: Wireless USB Manager).
2. Make sure the WIRELESS/WIRED switch is in the WIRELESS position
3. Plug in the power supply for your Wireless USB device adapter (TruLink Wireless VGA Device
Adapter).
4. Connect the USB cable between an available USB port on your computer and your Wireless USB
device adapter.
5. Complete cable association by pressing the "Accept Association" button when prompted. (Figure:
Cable Association)
6. Remove the USB cable from your Wireless USB device adapter and computer.
ROCEDURE
Figure: Cable Association
21