Bosch BLAUPUNKT KEY LARGO DM2000 Manual Del Usuario página 7

Storing the station names
You can assign a name to each radio station and store it in
memory. As much as 30 station names can be stored com-
posed with 8 characters each.
Storing the station names
1.
Tune in a station whose name you want to store.
2.
Press the for more than 2 seconds.
DISP
The " NAME EDT " will light then the " _ _ _ _ _ _ _ _ " on
the display window. The first " _ " flashes.
3.
Enter the characters.
A. Rotate the dial in a clockwise direction to select the
desired characters.
( A ➜ B ➜ C ➜ . . . Z ➜ < ➜ > ➜ ∗ ➜ + ➜
➜0➜1➜2➜3...9➜" "Space )
B. Press the to move the flashing cursor to the
TUN/TRK
next position. If you press
TUN/ TRK
sor moves to the left.
C. Repeat steps A. and B. to complete entering the entire
name 8 characters max.
Tip
To erase/correct a name, press the
seconds to clear the character and re-enter.
4.
Press the to store the station name.
MUTE / SENS
The station name flashes.
5.
To return to the normal radio reception, Press
Erasing the station names
1.
Tune in any station and press the
seconds.
2.
Press the .
MUTE / SENS
The station name or " _ _ _ _ _ _ _ _ " flashing.
3.
Rotate the dial to select the name of the station that you
want to erase. To erase all the names of the stations, dis-
play " ✳ALL DEL ".
4.
Press the for more than 2 seconds.
DISP
Repeat steps 3. and 4. if you want to erase other names.
5.
To return to the normal radio reception, Press
E-6
Direct Access to Memorized Stations via
Station call
You can search for the memorized AM & FM station names in
the memory.
1.
Press the
play window.
2.
Rotate the large dial to select the desired station name.
3.
Press the
Level Meter selection
The meter displays can be selected from four types.
➜ − ➜ ' ➜ /
'
You can select :
• METER 1
, the flashing cur-
• METER 2
• METER 3
• METER 4
• METER 0
for more than 2
DISP
1.
Press the
window.
2.
Rotate the dial in a clockwise direction to select the de-
.
DISP sired meter indication.
METER 1 ➜ METER 2 ➜ METER 3 ➜ METER 4 ➜ ME-
TER 0
for more than 2
DISP
L-ch Level meter
.
DISP
to display the " STN CALL " on the dis-
DISP
to tune in the desired station.
MUTE / SENS
: The level meter goes upward.
: Only the very top segment lights.
: The remaining segments light. (opposite of
METER 2)
: The level meter goes up and down dividing
from the center segment.
: No meter is indicated.
to display the " METER 1 " on the display
DISP
R-ch Level meter
Level Meter Sensitivity selection
The sensitivity of the level meter display can be switched.
You can select :
• LEVEL 1 : Normal sensitivity.
• LEVEL 2 : High sensitivity.
1.
Press the to display the " LEVEL 1 " on the display
DISP
window.
2.
Rotate the dial to select the desired meter sensitivity.
LEVEL 1
LEVEL 2
Enhancing the bass sound
For extended bass centered @ 72Hz, Blaupunkt's XBASS
function can be set for either each band and CD mode.
You can select :
• XBASS 1 : Enhanced BASS level (low).
• XBASS 2 : Enhanced BASS level (Middle).
• XBASS 3 : Enhanced BASS level (High).
• XBASS 4 : Enhanced BASS level (Very high).
• XBASS 0 : No BASS enhanced.
Press the repeatedly to select the bass sound.
XBASS
" " appears on the display window.
Each time you press , the current mode appears on
XBASS
the display window and the mode change as follows:
XBASS 0 ➜ XBASS 1 ➜ XBASS 2 ➜ XBASS 3 ➜ XBASS 4
Note
Reduce XBASS levels if your combination of speakers and add-
on amplifiers sound distorted at the preferred sound level.