Additional Information - USRobotics 5454 Guía Breve De Instalación

English
To restore the factory default settings, use a small object such as a paper
clip to press in and hold the reset button on the back of the access point
for 5 to 10 seconds.
After you restore the access point, reconfigure the access point by per-
forming "Step Two: Set Up the Access Point" on page 4.

Additional Information

For regulatory and warranty information, see the User Guide on the
USRobotics Installation CD-ROM.
For operation and configuration information, see the User Guide on the
USRobotics Installation CD-ROM. The User Guide contains detailed informa-
tion on the use and configuration of your Wireless
For expanded troubleshooting and additional information, see:
1. See the User Guide on the USRobotics Installation CD-ROM.
2. Go to the Support section of the USRobotics Web site at
www.usr.com/support/.
Many of the most common difficulties that customers experience have been
addressed in the FAQ and Troubleshooting Web pages for your Wireless
N
dx Access Point. The Support pages also contain information on the latest
firmware and may contain documentation updates.
3. Submit your technical support question using an online form, or contact the
USRobotics Technical Support Department.
4. See the Support contact information on the last page of this guide.
10
N
dx Access Point.