USRobotics 5454 Guía Breve De Instalación página 12

English
The Network Device Locator does not find the access point
1. Click Detect to rescan the network.
2. If the locator still does not find the access point, look at the client list for the
networking device that is connected to the access point. Refer to the device's
documentation to find out how to view the client list.
3. In the client list, find the MAC address shown on the bottom of the access
point and note the IP address associated with that MAC address. This is the
IP address of the access point.
4. Start a web browser, type the IP address of the access point, and press
ENTER.
5. Verify that the connection information is correct for the network to which
the access point is connected.
SecureEasySetup did not configure my wireless client.
Press the SecureEasySetup button on the back of the access point for one full
second and then release it. Verify that the SecureEasySetup LED on the front of
the access point starts blinking before initiating SecureEasySetup in the client
utility for your wireless adapter.
N
The Wireless dx Access Point does not appear when I scan for it with a
wireless client
The access point may not be broadcasting its network name.
1. Using a computer connected to the same networking device as the access
point, start a Web browser.
2. Type the IP address of the access point, and press ENTER to display the
configuration pages of the access point. You can get the IP address from the
Network Device Locator.
3. Click the Wireless tab and verify that Broadcast network name is selected.
If it is not selected, select it, scroll to the bottom of the Wireless page, and
click Save.
Disconnect the network cable before scanning for the access point.
My client is not communicating with the Wireless
! The access point may not have received a valid IP address for your network.
If the IP address is set to Dynamic, make sure that the access point is con-
nected to a DHCP server. If you use a static IP address verify that it is in the
same subnet as your client's IP address.
! The access point may not be responding. Try the following:
1. Reconnect by following the steps in "Connecting a Wireless Client" on
page 6.
8
N
dx Access Point