Connecting A Wi Reless Client; Connecting A Device Using Secureeasysetup; Connecting A Device Manually - USRobotics 5454 Guía Breve De Instalación

English
on the status page. Consider bookmarking the page for easy access to the
required information.
C o n g ra t u l a t i o n s . You have successfully completed the installation proce-
dure. You can verify your network connection by registering your Wireless
Access Point at www.usr.com/productreg/.

Connecting a Wi reless Client

You can use the SecureEasySetup™ button to connect installed Wireless
other certified SecureEasySetup wireless devices to your access point.
If your wireless client has SecureEasySetup, you should see one of the following
logos on the device or within the client utility:
If your wireless client does not support SecureEasySetup, you can manually enter
the wireless security settings.

Connecting a device using SecureEasySetup

1. Press the SecureEasySetup button on the back of the access point for 1 sec-
ond. The SecureEasySetup LED on the front of the access point starts blink-
ing after you release the button.
2. Initiate SecureEasySetup in the client utility for your wireless adapter.
3. The access point and the wireless device synchronise their wireless security
settings, and the device is securely connected to the access point.

Connecting a device manually

1. Ensure that the wireless adapter to be connected to the network is set to
infrastructure mode. For instruction in changing your adapter's wireless
mode, see your wireless adapter's documentation.
2. Set the network name or SSID in the wireless adapter's settings to the Net-
work name that is used on the access point. You can find the network name
2 BROADCOM, SecureEasySetup, and the SecureEasySetup logo are trademarks or registered
trademarks of Broadcom Corporation in the United States and/or other countries.
6
N
dx
N
dx or
2