Introduction; General Features - Bentel Security B-TEL99 Manual De Instalación Y Usuario

GENERAL FEATURES

Dialler
r 2 independent alarm channels with priority management.
r
Message choices:
l
Long Common Message of 32 seconds (common to both channels);
l Two Dedicated Messages of 16 seconds (one message per channel);
l
Short Common Message of 16 seconds (common to both channels) + 2 Brief Dedicated Messages of 8
seconds (one per channel).
r 255 event logger, each event shows: called telephone number, the trigger channel and call result
r
Stop Alarm cycle/s and Listen-in via remote telephone, by means of modifiable User Command PIN
r
Stop Alarm by means of modifiable User Command PIN on B-TEL99 keypad
r 7 programmable telephone numbers for each channel
r Up to 15 digits per telephone number; allows pauses of 1 or 5 seconds
r Repeats the alarm message for 20, 40, 60 or 80 seconds
r Repeats call cycle/s up to 5 times
r
Stop Alarm cycle/s terminal
r
Access to programming by means of modifiable Installer Command PIN on keypad
r Programmable alarm-call activation by positive drop or negative command
r "Voice answer detection" option
r Protection against accidental battery polarity inversion
Telephone line
r
Test for telephone-line fault and cutting, with anomaly signalling on open-collector output
r Bypassable "dial tone" check
r Electronic telephone-line interface
r
Over-voltage protection
r
Programmable as DTMF (tone) or pulse dialling
Interface
r Digital recording/playback of messages
r Built-in loudspeaker for message playback
r
Single digit LED display
r
Alphanumeric command keypad
r Non-volatile memory for programmed data storage
Container
r Tamper protection
r
Compartment for 12 V - 1.2 Ah battery (not supplied)
24

INTRODUCTION

Telephone Dialler B-TEL99