Parts Of The Energizer - Datamars A15Xi Guia Del Usuario

Using the energizer

Parts of the energizer

Power indicator
Alarm indicator
Fault indicator
Turning the energizer on
The energizer will be on as soon as it is plugged in to the mains power supply and
switched on at the wall.
Turning the energizer off
WARNING!
The energizer will reactivate following a power failure, even if it was in
standby mode before the power failure. The fence should be regarded as live at all
times, regardless of whether the energizer is in standby mode or not. If you are
working on a section of fence, isolate the section with a cut-out switch, or
disconnect the energizer from the mains power supply.
To turn off the energizer completely, while working on a section of fence:
Switch the energizer off at the wall and disconnect it from the mains power supply.
Output voltage lights
Fence earth monitor terminal
Power indicator (green)
LED On = Energizer is on
LED Off = Energizer is off
Mag key sensor
Heavy load indicator
Light load indicator
Earth status indicator
Fence output terminal
Fence earth terminal
15