more than 400 ms) - this error clears when starting the communication.
E3 – Overvoltage error (Battery voltage higher) – this error clears if you put back
the original battery.
Getting ready!
1. Choose a suitable venue for riding.
2. Unfold the scooter in accordance with the instructions.
3. Adjust the handle bar to the suitable height according to your stature.
Start
1. Press the power button to turn on the power.
2. Stand with one foot on the scooter and leave another foot on the ground.
3. Gently press down on the right thumb accelerator, the scooter will
immediately move forward slowly. Place the foot which is on the ground on
the scooter. With your right thumb press the right thumb accelerator. The
bigger the pressure, the faster it will go.
Brake
1. Electromagnetic brake - pressing the left thumb electronic magnetic brake
will activate the electromagnetic brake, which will power off the scooter and
apply the brake. The more you press, the greater the braking force will be.
2. Mechanic brake – E-TWOW also has a mechanic brake, which is activated
by pressing with the foot on the rear fender.
Maximum Speed Limitation - L1, L2, L3, L4, L5
A lot of countries have a legislation that imposes a speed limitation for electrical
vehicles. Once a maxim speed is set, the scooter won't exceed that speed. The
maximum speed limit options are 6 km/h, 12 km/h, 20 km/h, 25 km/h, 30km/h. This
function can be activated or deactivated from the central control unit, according to
the user's needs.
Zero start - P1
This function is designed for safety reasons. The option allows the acceleration
to be activated only the scooter is first pushed with the foot and the wheel is in
motion, ensuring that the acceleration lever is not actioned by mistake.
The "zero start" function is not activated by default, you need to activate it
after the purchase of the scooter. This function can be activated or deactivated
from the central control unit, according to the user's needs.
RIDING OPERATION
11
ELECTRIC TWO WHEELS
A NEW ERA IN URBAN MOBILITY