Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Become familiar with these terms before operating the
unit.
CFM: Cubic feet per minute.
SCFM: Standard cubic feet per minute; a unit of
measure of air delivery.
PSIG: Pounds per square inch gauge; a unit of meas-
ure of pressure.
ASME: American Society of Mechanical Engineers;
made, tested, inspected and registered to meet the
standards of the ASME.
Code Certification: Products that bear one or more
of the following marks: UL, CUL, ETL, CETL, have
been evaluated by OSHA certified independent safety
laboratories and meet the applicable Underwriters
Laboratories Standards for Safety.
This unit is capable of powering the following Accessories. The accessories are available through the current
Power and Hand Tool Catalog or full-line Sears stores.
Accessories
•
In Line Filter
•
Tire Air Chuck
•
Quick Connector Sets
(various sizes)
•
Air Pressure Regulators
•
Oil Fog Lubricators
•
Air Hose:
1/4", 3/8" OR 1/2" I.D.
in various lengths
Contents of Carton
1 - Air Compressor
2 - Wheels
2 - Shoulder Bolts, 3/8-16
2 - Hex Nuts, 3/8-16
2 - Molded Foot Bumpers
1 - Handle
1 - Handle Grip
2 - Screws, #10-16 x 1.00
GLOSSARY
ACCESSORIES
Specialty Tools
•
Air Brush
•
Inflating/Blow Gun
•
Grease Gun
•
Caulk Gun
•
Engine Cleaner
Sand Blaster
Carpentry Tools
•
Finishing Nailer / Stapler
•
Construction Nailer /
Stapler
ASSEMBLY
Cut-In Pressure: While the motor is off, air tank
pressure drops as you continue to use your accesso-
ry. When the tank pressure drops to a certain low
level the motor will restart automatically. The low
pressure at which the motor automatically restarts is
called "cut-in" pressure.
Cut-Out Pressure: When an air compressor is
turned on and begins to run, air pressure in the air
tank begins to build. It builds to a certain high pres-
sure before the motor automatically shuts off - pro-
tecting your air tank from pressure higher than its
capacity. The high pressure at which the motor shuts
off is called "cut-out" pressure.
Branch Circuit: Circuit carrying electricity from elec-
trical panel to outlet.
Socket Driving
•
1/2" Impact Wrench
•
3/8" Impact/Butterfly
Wrench
•
3/8" Ratchet
•
1/4" Ratchet
Material Shaping
•
2.625" Hammer
•
1.625" Hammer
•
3/8" Drill
•
Mini High Speed Rotary
•
Reciprocating Saw
•
Nibbler
Tools Required for Assembly
1 - 9/16" socket or open end wrench
1 - 3/8" socket
7-Eng
Spray Painting
•
Multi-Purpose Spray
Gun
•
Automotive Spray Gun
•
HVLP Spray Gun
Finishing / Sanding
•
Jitterbug Sander
•
Straight Line Sander
D21996
Capítulos
Tabla de contenido
