Installation; Safety Information - Nokia CK-20W Manual De Instrucciones

4. Installation

■ Safety information

Observe the following safety guidelines when installing the car kit.
• Only a qualified service technician should install or service the car kit using
the approved original Nokia parts supplied in the sales package. Faulty
installation or service may be dangerous and may invalidate any warranty
which may apply to the car kit.
End users should remember that the car kit comprises complex technical
equipment that requires professional installation using special tools and
expert know-how.
• Instructions given in this guide are general guidelines which apply for the
installation of the car kit in an automobile. However, due to the wide variety
of car types and models available on the market, this guide cannot consider
the individual technical requirements relevant for any particular vehicle.
Contact the vehicle manufacturer for detailed information about the vehicle
in question.
• The car kit is suitable for use only in vehicles with 12 V negative grounding.
Use on other supply voltages or alternative polarity will damage the
equipment.
• Remember that modern automotive systems include on-board computers
where key vehicle parameters are stored. Improper disconnection of the car
battery may cause loss of data, necessitating extensive effort for re-
initialization of the system. If you have any concerns, contact your car dealer
before any installation work is done.
• Do not wire the car kit equipment to the high-voltage lines of the ignition
system.
• When installing the parts of the car kit ensure that none of them interfere
with or hinder the steering or braking systems or other controls or systems
used in the operation of the vehicle (for example, airbags). Ensure that the car
kit and any of its components are not installed where you might come in
contact with it in the event of an accident or collision.
I n s t a l l a t i o n
19