Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
Voltage
Heating Power
Dimensions
Weight
Grounded Outlet
Over-Heat safety feature
This heater is equipped with a Ground Fault Circuit Interrupter (GFCI), a safety feature that renders it inoperable under
some abnormal conditions, such as immersion in water.
To make sure the GFCI is functioning properly, perform the following test at 120VAC 60Hz frequency.
1. Plug in heater and turn on. Press test button on plug.
2. There will be an audible click. Heater should stop working. Unplug the heater and push the reset button in. Reinsert
plug into outlet.
3. If GFCI is NOT operating properly, immediately unplug heater. DO NOT USE HEATER WITH FAULTY OUTLET OR PLUG.
LOCATING HEATER:
This heater is designed to be mounted on a wall only. It will not operate as a freestanding heater and should not be
modified to do so. For convenience and efficiency, install heater:
1. Where all clearances can be maintained. (see Page 5)
2. Where there is easy access for operation, inspection and service.
3. Within 5 feet of proper electrical outlet.
4. Away from any doorway or water source such as tub, sink, etc.
5. Ensure there is no existing electrical wiring, plumbing or other obstructions in the area chosen.
6. Wall must be flat and must be a solid surface.
7. In the coldest part of the room.
8. Mounting screws are included for Dry Wall mounting only, for other installations the installer or home owner is
responsible to ensure that the heater is securely mounted to wall.
WALL MOUNTING REQUIRED
Failure to position the heater in accordance with the guidance provided or failure
to secure heater securely to the wall could result in property damage and personal
injury.
IMPORTANT
120V AC 60HZ;
1500 Watts/12.5 Amps
17.32" Wide x 4.49" Deep x 19.21" High
10.6 Lbs
~ 4 ~
Tabla de contenido
