Maintenance; Examples Of Application - Felisatti SD10,8IL Manual Del Usaurio

Fastening torque may depend on the length,
③
grade, and diameter of the bolt.
Fastening torque may also depend on the
strength on the material (wood, metal, etc) to
fasten and the type of the washer used. Use
the tool after calculating the appropriate
impact operation time by performing a trial
fastening operation and measuring the torque
value from the bolt using a torque wrench.
The power tool that has malfunctioning
power failure switch is dangerous and
must be repaired before use.
9) Residual current device
Recommendation that the tool always be
supplied via residual current device with a ratde
residual current of 30 mA or less.

9. Maintenance

Always keep tool and air vent clean for safe work.
1) Changing Tool
Before you change the tool, you must
remove the battery from the body of the
electric drill or set the rotational
direction switch in lock position
(neutral position).
10
Mounting the Bit
①
- Pull the lock sleeve forward.
- Insert a screw driver bit into the tool holder to
the end and release the lock sleeve.
Removing the Bit
②
- Keep the lock sleeve pressed forward
while taking out the bit.
2) Environmental Protection
The tool and its accessories contain much
raw materials and plastics that can be recycled
after their life. Therefore, plastic parts are
indicated with their material types so that
material type.
Do not dispose of the battery with home
3) What to do when the tool does not work
normally
It is very dangerous for customers to
troubleshoot or repair the tool for themselves,
Contact the nearest A/S center (sales agency)
and request for a service.
The repair shall be requested to the
Always keep tool and air ventage clean for
Before you change the tool, you must remove
set the rotational direction swith in lock position
The tool and its accessories contain much
raw materials and plastics that can be
recycled after their life. Therefore, plastic
parts are indicated with their material types so
that they can be classified and recycled for
Do not dispose of the battery with home
3. What to do when the tool does not work normally
For power tool with type Y attachment: if the
this has to be done by the manufactuer or his
4) Y attachment cord
If the replacement of the supply cord is
necessary. This has to be done by the
manufacturer or his agent in order to avoid a
safety hazard.

10. Examples of Application

Driver Bit
Driver Bit
Magnetic Set
Socket Bit
Power
Screwdriver Set
Drill Bit for
Woodwork
Hole Saw
Drill Bit for
Woodwork
Chuck Adaptor
Socket Adaptor
Socket Adaptor
Universal Joint
Drill Socket
Socket
Socket
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about recycling
of this product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
CORDLESS IMPACT
DRIVER
9