Display Setting; Audio Setting - Insignia IS-TV040921 Manual Del Propietário

B

DISPLAY SETTING

Follow steps 1 to 2 in the "CUSTOM MENU" sec-
tion on page 26.
3
K / L
Press [ ] to select the below items then
press [ENTER].
TV MODE: QUICK
You can change certain aspects of the DVD display
screens and on-screen mes-
sages on the TV screen.
¡
4:3 LETTER BOX (default):
To show black bars on top
and bottom of the screen.
¡
4:3 PAN & SCAN: To show a full height picture
with both sides trimmed.
STILL MODE:
This function allows you to
adjust picture resolution and
quality in the still mode.
¡ AUTO (default):
Automatically select the best
resolution setting (FRAME or FIELD) based on the
data characteristics of the pictures.
¡ FIELD: Select "FIELD" when the pictures are still
unstable even if "AUTO" is selected.
FIELD stabilizes the pictures, although the picture
quality may become coarse due to the limited
amount of data.
¡
FRAME: Select "FRAME" to display relatively
motionless pictures in higher resolution.
FRAME improves the picture quality, although it
may unstabilizethe pictures due to simultaneous
output of two field data.
4
Press [SETUP] to exit the menu.
QUICK MENU
¡ You can select the "TV MODE" or "DOLBY DIGITAL" from the QUICK menu quickly. To access the
QUICK menu, select "QUICK" instead of "CUSTOM" at step 1 on page 26.
LANGUAGE SETTING FOR THE ON-SCREEN MENUS
¡
You can access the TV SETUP menu by pressing [SETUP] from the DVD mode. Refer to
"MENU LANGUAGE" on page 17 to change the language for the on-screen menus.
C
Choose the appropriate Audio settings for your equip-
ment as it only affects during the playback of DVD
discs.
Follow steps
tion on page 26.
SETUP DISPLAY
DRC (Dynamic Range Control):
TV MODE 4:3 LETTER BOX
¡
STILL MODE AUTO
¡
DOWN SAMPLING:
¡
¡
When playing disc with
SETUP DISPLAY
copyright Protection
TV MODE 4:3 LETTER BOX
STILL MODE AUTO
¡
DOLBY DIGITAL:
Set to "BITSTREAM" when
the unit is connected to a
Dolby Digital Decoder.
¡
¡
- 27 -

AUDIO SETTING

1 to 2 in the "CUSTOM MENU" sec-
3
K / L
Press [ ] to select the below items then
press [ENTER].
To compress the range of soft
to loud sound.
The default setting is "ON".
ON : Output in 48 kHz.
(default)
OFF : Output the original
sound.
If you select "OFF", copyright protection will be
activated and sound will be down sampled at 48kHz.
QUICK
BITSTREAM: Output a Dolby Digital signal
(default)
PCM: Convert the Dolby Digital to PCM
(2 channel stereo)
4
Press [SETUP] to exit the menu.
SETUP AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
SETUP AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
SETUP AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
EN