Wood Stud Installation
2A
CAUTION:
Avoid potential
personal injury or property damage!
● Drywall covering the wall
must not exceed 5/8 in. (1.5 cm)
● Minimum wood stud size:
nominal 2 x 4 in. (5.1 x 10.2 cm)
actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
● Minimum horizontal space
between fasteners:16 in. (40.6 cm)
● Stud centers must be verified
4
POSITION TEMPLATE
4X
To calculate your precise wall plate location, check out
TIP:
our HeightFinder at sanus.com [www.sanus.com/1172].
6
OPEN COVERS
1
LOCATE
Visit
HeightFinder™
sanus.com
/1172
05
P
06
P
Min. 16 in. (40.6 cm)
Max. 5/8 in. (1.5 cm)
2
VERIFY
5
DRILL
4X
CAUTION:
7
SECURELY TIGHTEN
07
06
05
CAUTION:
All four lag bolts
unwanted movement of the wall plate
securely fastened to the wall before continuing on to the next step.
Min. 1 ½ in. (3.8 cm)
3
05
Be sure you drill into the CENTER of the stud.
Avoid potential personal injury or property damage!
MUST BE firmly tightened to prevent
07
. Ensure the wall plate is
06
Skip to STEP 3 on PAGE 9.
Min. 3 ½ in. (8.9 cm)
MARK
2 ¾ in. (6.9 cm)
7/32 in.
(5.5 mm)
7