Tabla de contenido
STEP 1
ATTACH TV BRACKET TO TV
Parts and Hardware for STEP 1
WARNING:
This product contains small items that could be a choking hazard if swallowed.
and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
TV Screws
01
[Only one size fits your TV]
(qty. 4 each)
M6
M6 x 12mm
M8
M8 x 16mm
M8 x 30 mm
M8 x 40mm
M8 x 50mm
1.1
Select TV
Screw Diameter
Only one screw size fits your TV.
M6
01
NOTE:
If your TV
included inset spacers or
adapters, use them UNDER
the mount hardware.
4
M6 x 35mm
M6 x 20mm
M8 x 20mm
M8 x 25mm
M8 x 35mm
1.2
A
M8
Use short TV screws
Spacers
CAUTION:
engagement with your screw
spacer
—
Too short will not hold your TV.
—
Too long will damage your TV.
Washers
(qty. 4 each)
02
M6/M8
Select TV Screw Length / Spacers
NO SPACER
• Flat Back TV
[TV brackets
lay flat on your TV]
01
.
not needed.
03
Verify adequate thread
, washer
01
combination AND TV bracket
03
Before starting assembly, verify all parts are included
Spacers
[If necessary]
(qty. 4 each)
03
M6/M8
2.5mm
R
RELEASE
CORD
(ATTACHED)
5mm
22mm
B
SPACER NEEDED
• Flat Back TV
with
Extra Space Needed
[for deep inset holes
or cable interference]
Use long TV screws
and spacers
01
create extra space between the TV and TV bracket.
Inset Holes
Cables
,
02
.
04
Too Short
Too Long
TV Bracket
04
(qty. 1)
B
Screws
(ATTACHED)
M
MOUNTING TABS
(ATTACHED)
• Rounded or
Irregular Back TV
[TV brackets NOT
resting flat on your TV]
to
03
Rounded Back
01
02
01
02
04
04
03
Correct
Tabla de contenido
