Tabla de contenido
STEP 2A
CAUTION:
Avoid potential
personal injury or property damage!
● Drywall covering the wall
must not exceed 5/8 in. (1.5 cm)
● Minimum wood stud size:
nominal 2 x 4 in. (5.1 x 10.2 cm)
actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
● Minimum horizontal space
between fasteners:16 in. (40.6 cm)
● Stud centers must be verified
4
POSITION TEMPLATE
4X
06
To calculate your precise wall plate location, check out
TIP:
our HeightFinder at sanus.com [www.sanus.com/2567].
6
REMOVE TEMPLATE
06
6
Wood Stud Installation
Max. 5/8 in. (1.5 cm)
1
LOCATE
Visit
HeightFinder™
sanus.com
/2567
7
SECURELY TIGHTEN
Open
covers
CAUTION:
Avoid potential personal injury or property damage!
Do not over-tighten the lag bolts
until they are pulled firmly against the wall plate
Min. 1 ½ in. (3.8 cm)
Min. 16 in. (40.6 cm)
2
VERIFY
5
DRILL
4X
06
CAUTION:
Be sure you drill into the CENTER of the stud.
07
. Tighten the lag bolts only
08
.
07
Min. 3 ½ in. (8.9 cm)
3
MARK
2 ¾ in. (6.9 cm)
7/32 in.
(5.5 mm)
08
4X
Close
bottom
cover
Skip to STEP 3 on PAGE 9.
Tabla de contenido
